Real glossy 13" carbon fiber shaft with rubber fletchings. I can make them with several colored fletching and/or use matte carbon fiber. The ID of the shaft is 8mm, which will slip over the existing linkage, no stress is placed on this shaft. If your shift linkage is longer than 13", I can source longer tubing. You can cut to length with bandsaw, hacksaw, or cutting wheel. If you like, I can cut it for you if you provide exact measurements. Email me with questions.

If it’s a bit loose on the shift rod, you can wrap a layer or two of electrical tape around the rod at the left end. Be sure to measure exactly the length of the exposed rod.